9280 4WD Articulated Tractor

Specification CASE IH 9280

ENGINE Cummins

Engine Horsepower (kW) 375 (280)

PTO hp (kW) 344.5 (257)

Max drawbar hp @ tested rpm 315.86 (235.63)

Cu. in Disp.(L) 1-6TA/855 (14)

Operating RPM 2100

Op torque-lb ft (Nm) 938 (1276)

Peak torque-lb ft (Nm) 1266 (1717)@ 1 400

Engine Torque Rise % 35

TRANSMISSION

Type Full P.S.

Speeds Fwd/Rev 12/3

On the go wo clutch 12

Field speeds 3-8 mph 6(1)

Speed Range mph 2-17.3

Speed Range km/h 3.22-27.8

Clutch Type Wet Disc

AXLE

Type Outboard Planetary

Tread Adjust4n(mm) (std) Fixed

Length Std-in(mm) Not Applicable

Differential Lock Opt F& R

Turning Radius

Center drawbar-ft(m) 17.5 (5.3)(21

Center out tire, in set -ft(m) 20.8 (6.3)

HYD.SYSTEM PFC

Flow-US gpm (1/min)

Pump (flow) 27(102)

Remotes (flow) 27(102)

Press - psi (kPA)

Pump (pressure) 2500 (17,237)

Remotes (pressure) 2500 (17,237)

No remotes std/opt 4/0

Specification CASE IH 9280

Flow controls in cab - std/opt I Std/3 Opt

Hitch Category IVN/ill

Lift Capacity 14,000 (6350)

24" (610mm) Back-lb(kg)

GENERAL

Std Instrumentation Digital & Gauges

Sound level-dB(A) 79

Fuel Cap-gal(L) 270 (1022)

Altemator-Amp 125

Wheelbase-in(mm) 144 (3658)

Oscillation-degrees 30

Steer-type & degree Art - 42

Min Shipping Wt-lb(kg) 29,000 (13,166 )1 3

Avg Shipping Wt-lb(kg) 34,499 (15,648 )( 4

Max Operating Wt-lb(kg) 40,000 (18,144)