CASE Tractor Model 8910

POWER, PTO 135 hp (100 kW)

ENGINE

Rated speed 2200 rpm

Type 6-cylinder, in-line, four-stroke cycle,

valve-in-cylinder-head,

mid-stop wet sleeve diesel

Aspiration Wastegate turbocharged

Displacement 505 cu. in. (8.3 L)

Bore and stroke . .4.49 x 5.31 in. (1 14 x 135 mm)

Compression ratio 16.5 to 1

Lubrication Constant pressure and

spray with piston oil cooling

FUEL SYS TEM

Type Fuel injection with mechanical governor

Filter Spin-on primary

Injection pump Robert Bosch, Type MW

Injectors Robert Bosch, 17 mm

TRANSMISSION 18-speed full powershift

w/hydraulically actuated clutches:

1 8 F, 4R. Optional: Creeper w/additional 6F, 2R

BRAKES Power, internal wet-disc

EL EC TRICA L S YS TEM

Alternator 1 1 0 amp/I 2 volts

Battery capacity (2) 1900 cold cranking amps

RE4R AXLE

Diameter - .3.5 in. (89 mm)

Standard width 112 in. (2844 mm)

Optional width 96 in. (2438 mm)

Differential lock Electrically actuated

FRONTAXLES

Steering Hydrostatic power

2WD tread range 60-88 in. (1524-2235 mm)

MFD tread range 60-88 in. (1524-2235 mm)

HYORAULICS

Type Closed center, pressure/flow

compensated, lst section priority

Remote circuits 2 standard, 3rd and 4th optional

Main pump Axial piston

Pump capacity.. 29 gpm (1 1 0 Umin) @ 2200 rpm Maximum pressure 2800 psi (1 9 000 kPa) Max. remote flow/pressure .... 27 gpm / 2300 psi (1 02.3 Umin / 16 000 kPa)

3-PT HITCH

Sensing

Lift capacity

INDEPENOEAF T PTO

Category III/IIIN

Electronic lower-link

7,700 lb. (3493 kg)

Dual shaft standard,

1-3/8 in. (34.9 mm) 540/1000 rpm

CAPACITIES

Fuel tank 84 U.S. gal. (318 L) standard, 101 U.S. gal. (383 L) optional

Cooling system 28 U.S. qt. (26.5 L) ............

Oil capacity w/filter 22 U.S. qt. (21 L)

Hydraulic fluid 45.5 U.S. gal. (172 L)

WHEELBASE

2WD/MFD 1 1 8.3 in. (3.0 m)

Front axle clearance 2WD 22.4 in. (568 mm),

MFD 16.6 in. (421 mm)

SHIPPING WEIGHT

2WD 15,215 lb. (6901 kg)

MFD 16,230 lb. (7362 kg)