7200 Series Magnum Tractors
Specification CASE IH 7250
ENGINE 8Case IH 8.3L
Adv PTO hp(kw) 215 (160)
Cu in Disp (L) 505 (8.3)
Operating RPM 2200
Op torque-lb ft (Nm) 611 (828) @ 1500 rpm
Peak torque-lb ft (Nm) 764 (1036) @1500 rpm
Aspiration Turbo/Aftercooled
TRANSMISSION Full Powershift
Speeds fwd-rov/opt 18-4/24-6
On the go wo clutch
w/o clutch/opt 18/24
Field speeds/opt 7/7
Clutch Type Wet Disc
Type of Fwd/Rev Shti Shft Power
REAR AXLE
Diameter-in(mm) 4 (102)
Length Std-in(mm) 120 (3048)
Length Opt-in(mm) None
Std tread adj-in(mm) 61-164 (1549-4166)
Opt tread adj-in(mm) None
Max dual tread cap-in (mm) 162 (4115)
MFD axle tread adj-in (mm) 60-95 (1524-2413)
MFD turning radius
w/tire size 16.9 x 30 Rl
@ tread sefting-in 73.8
Center drawbar-ft(m) 16.0
Center out tire, in set -ft(m) 19.0
HYD.SYSTEM PFC
Pump flow US-gpm(L) 28.5 (108)
Flow @ remotes-gpm 2.5-22 (9.5-83.3)
Press - psi (kPA) 2,650 (17926)
Adv hitch cap,lb(kg) 14,950 (6781)
Opt hitch cap,lb(kg)
Specification CASE IH 7250
GENERAL
Cab glass area-sq ft(m) 47.7 (4.43)
Fuel Cap-gal(L) 95 (360)
Avg Shipping Wt-lb(kg)
2WD NA
MFD 17,445 (7903)
Max Vehicle Wt-lb(kg) 27,500 (12474)